Design your own Gun Rack
DUE TO HIGH DEMAND, ALL ORDERS ARE TAKING UP TO 3-4 WEEKS TO SHIP CUSTOM-DESIGNED RACKS CAN BE ORDERED THROUGH EMAIL
GALLERY
All steel products are manufactured from 14 gauge steel and are available in Grey, Tan, and Brown powder coat finishes.
Support Bars
|
Support Bar 23” wide
Item # SB-23 
23” wide Support Bar to install the wall panels. This part is needed on the top of each wall panel row. Includes 2 rubber caps and screws.
The dimensions are 2” high x 23” wide. Weight: 3 lbs. Sold as each. |
36" wide Support bar to install the wall panels. This part is needed on the top of each wall panel stack. Includes 2 rubber end caps and screws.
The dimensions are 2” high X 36” wide. Weight: 3 lbs. Sold as each. |
41" wide Support bar to install the wall panels. This part is needed on the top of each wall panel stack. Includes 2 rubber end caps and screws.
The dimensions are 2” high X 41” wide. Weight: 3.2 lbs. Sold as each. |
72" wide Support bar to install the wall panels. This part is needed on the top of each wall panel stack. Includes 2 rubber end caps and screws.
The dimensions are 2” high X 72” wide. Weight: 4.4 lbs. Sold as each. |
Trim Pieces
Weapons storage system 23″ wide trim piece that’s made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed. The slanted shapes cleans up all the mounting holes. This piece easily mounts with magnets and stays securely in place. To cover all the mounting holes, you will need 1 trim piece for the top and bottom of each 23″ wide rack section.
The dimensions: 3/4” high x 23” wide. Weight: 2 lbs. Sold as each. |
Weapon storage system 36″ wide trim piece that’s made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed. The slanted shapes cleans up the all the mounting holes. This piece easily mounts with magnets and stays securely in place. To cover all the mounting holes, you will need 1 trim piece for the top and bottom of each 36″ wide rack section.
The dimensions are 3/4” high x 36” wide. Weight: 3 lbs. Sold as each. |
Weapon storage system 41″ wide trim piece that’s made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed. The slanted shapes cleans up the all the mounting holes. This piece easily mounts with magnets and stays securely in place. To cover all the mounting holes, you will need 1 trim piece for the top and bottom of each 41″ wide rack section.
The dimensions are 3/4” high x 41” wide. Weight: 5 lbs. Sold as each. |
Standard Wall Panels
24” high x 23” wide Wall Panel with slot hanger holes. Offers 14 rows across alternating slot holes. This wall panel is used for small to large wall coverage. Can be configured next to the WP-24.36. Gives great options for hanger and shelf placement. For the proper installation, the SB-23 support bar is needed for the top of each Wall Panel row.
Dimensions: 24” high X 23” wide. Weight: 13 lbs. Sold as each. |
|
Thin Wall Panels
|
|
|
Thin Wall Panel 24” high X 3” wide
Item # WPT-24.3 
Thin wall panels are ideal for smaller gun rooms and stand-alone racks. They are designed to display guns horizontally, with hanger slots for even adjustability. Interlinked panels offer a height of 24" and a width of 3" with three rows of alternating slot holes. No support bar or trim kit is required.
Dimensions: 24” High x 3” Wide. Weight: 2 lbs. Sold as each. |
Our thin wall panel system is ideal for small spaces like workbenches, safes, closets, and RVs. They work well with Magwell hangers and other configurations, and can be stacked without interlinking. This model replaces the WP-48.5, has slot hanger holes, measures 48" x 5", and requires no support bar or trim kit.
Dimensions: 48” high x 5” wide. Weight: 7 lbs. Sold as each. |
Thin Wall Panel - 50" high x 10" wide
Item: # WPT-50.10 
Our thin wall panel products are perfect for smaller wall spaces and stand-alone racks. They are mainly designed for vertical gun storage but can be used for other hangers too. These panels can be installed side by side and do not require any support bar or trim kit.
Dimensions: 50” high x 9 ¾” wide x ½” deep Weight: 10 lbs. Sold as each. |
Horizontal Hangers
Weapon Storage System HH-B-1 includes a horizontal wall hanger that supports 1 rifle barrel. 2 hangers are needed for each rifle. Check the hanger opening to ensure it fits the barrel. Some accessories may require a wider opening hanger.
Rubber insert to protect the rifle. The dimensions are 4" high x 4" deep. Weight: 1 lb. Sold as each. |
Weapon Storage System Horizontal HH-S-1 wall hanger that supports 1 rifle stock. This part is used to support the lower part of the rifle, around the stock area. 2 horizontal hangers are required for each rifle.
Rubber insert to protect the rifle. The dimensions are 4" high x 4" deep. Weight: 1 lb. Sold as each. |
|
|
Horizontal Hybrid 3-Rifles on Angle
Item # HH-HY-BS-3A Pair 
Hybrid Horizontal Hanger, 3-rifle. It takes less rack space than 3 horizontal rifle but all 3 rifles can still be seen. The "Hybrid" design features half steel and half HDPE, a plastic composite material. This hanger is universal so it can be used on either end of the rifle.
Dimensions: 4” high x 4” wide 15” deep Weight: 3 lbs. Sold as set, 2 pieces |
Horizontal Hanger on Angle
3 Rifle Stocks Item # HH-S-3A 
Horizontal 3-rifle hanger, on angle. This hanger is used to hold 3 rifles horizontal and angles down so you can see some of each weapon. This same model is used for the stock area and also the handguard / barrel area. Two hangers are needed for each set up. They can be adjusted up/ down and side to side for the perfect fit and look.
Dimensions are 6” high x 10” deep. Weight: 3 lbs. Sold as each. |
Magazine Well Horizontal Hanger 556
Item # MWH-556.1 
Weapon Storage magazine well horizontal hanger. Holds an AR with a magazine well insert. Rifle can face either direction. Secures into place with the mag release . Fits 5.56 rifles with standard mag well. Holds 1 rifle. Includes hanger, plastic insert and mounting screws.
Dimensions: 6” high X 3 ¼” deep. Weight: 1 lb. Sold as each. |
Weapon Storage magazine well horizontal hanger. Holds an AR with a magazine well insert. Rifle can face either direction. Secures into place with the mag release. Fits 5.56 rifles with standard mag well. Holds one rifle. Includes hanger, plastic insert and mounting screws.
Dimensions: 6” high X 3 ¼” deep. Weight: 1 lbs. Sold as each. |
|
Horizontal Hangers For 45 Degree Panels
Item # HH-HY-BS-1.45-Pair 
Custom hangers designed for 45-degree panels that can be used for both sides of the rifle. The "Hybrid" design features half steel and half HDPE, a plastic composite material. This hanger can fit extra-wide weapons and includes everything needed to hang 1 rifle.
Dimensions: 6” high x 1” wide 7” deep. Weight: 2lbs. Sold as a Pair. |
Heavy-Duty Hybrid Horizontal Hanger Pair
Item # HHD-HY-BS.1 Pair 
This is a heavy-duty hybrid horizontal hanger suitable for larger, heavier rifles like .50 cals. It attaches to the rack at 3 points, holds the rifle further away, and can fit wider guns. The hybrid design features half steel and half HDPE, a high-end plastic composite material that protects the gun. 2 hangers are needed per rifle.
Dimensions: 6 ¾” high x 1” wide x 5 ½” deep. Weight: 1 lb. Sold as a Pair. |
Heavy Duty Horizontal Hanger Pair, includes 1 stock support and 1 rifle barrel support. This is specially designed for large rifles such as 50 Cal’s. It attaches to the wall panel with 3 hooks (instead of 2) and holds the rifles further away from the wall to fit bipods etc…
Rubber insert to protect the rifle. Dimensions: 5.5" high x 5.5" deep. Weight: 3 lb. Sold as a Pair. |
This is a Heavy Duty Horizontal Hanger for large rifles such as 50 Cal's. It supports 1 rifle stock and attaches to the wall panel with 3 hooks. It holds the rifles further away from the wall to allow for bipods, etc. Please note that 2 horizontal hangers are required for each rifle and can also be used for the barrel part of the rifle if needed.
Rubber insert to protect the rifle. The dimensions are 5.5" high x 5.5" deep. Weight: 3 lb. Sold as each. |
Vertical Hangers
This vertical wall hanger is for a single rifle barrel. Check the hanger opening to ensure it fits the barrel. For accessories like suppressors, use a hanger with a wider opening like part# VH-S-1.
The dimensions are 3.5” high X 7” deep. Weight: 1 lb. Sold as each. |
Vertical Stock Support
1-Rifle Stock Item # VH-S-1 
Vertical wall hanger for 1 rifle stock. Supports lower part of rifle when hanging vertically on wall panel.
Rubber insert to protect the rifle. Dimensions: 3.5" high x 7" deep. Weight: 1 lb. Sold as each. |
Vertical Barrel Hanger
1-Rifle Deep Item # VH-D-1 
Weapon Storage Vertical wall hanger that supports 1 rifle barrel. This hanger will support the top end of the rifle when in vertical position. Wider "U" to fit suppressed guns or one's with larger hand guards and/or rails. This particular part has a deeper “U” to bring the rifle closer to the wall panel.
Dimensions: 3 ½” high X 3 ¼” wide X 5” deep. Weight: 1 lb. Sold as each. |
Weapon Storage Vertical wall hanger that supports 3 rifle stocks. This part is used to support the lower part of the rifles, around the stock area, when hanging it vertically on any of the wall panel products.
Rubber inserts to protect the rifles. Dimensions: 3.5” high X 7” deep. Weight: 1 lb. Sold as each. |
|
The Hybrid Vertical Hanger is designed for the upper part of a rifle. It is made of half steel and half high-end plastic composite material. The "U" shape fits most stocks, handguards, barrels, and suppressed rifles. The HDPE insert is adjustable. A stock support shelf hanger is required for proper use.
Dimensions: 3 ½” high x 3 1/4” wide x 7” deep. Weight: 2 lb. Sold as each. |
Hybrid Vertical Upper Hanger for 3 rifles. Features half steel and half HDPE composite material. Adjustable HDPE inserts for closer or further hold of rifles. Allows room for mounted optics. Includes steel hanger, HDPE insert, and screws.
Dimensions: 3 ¾” high x 9 ¾” wide 6” deep Weight: 2 lbs. Sold as each |
|
Vertical Single Stock
Support Item # VH-SS-1 
Weapons storage vertical wall hanger that supports 1 rifle stock. This part is used for the rifle to sit on when hanging it vertically on any of the wall panel products.
The dimensions are 3” high X 10” wide. Weight: 1.2 lbs. Sold as each. |
Vertical Hanger Sideways Stock
Item # VHS-SS-1 
Weapon Storage Vertical hanger that holds the rifle vertically and sideways. This part is used to support the stock part of the rifle when hanging it vertical-sideways on any of the wall panel products. Comes with the hanger and the base. Part VHS-B-1 completes the set to hold one rifle.
The dimensions are 4” high X 3.5” wide. Weight: 1 lb. Sold as each. |
|
Vertical weapon storage magazine magwell hanger for AR-style rifles with standard mag well. Holds 1 rifle and comes with a hanger, plastic insert, and mounting screws.
Dimensions: 3 ½” high X 8” deep. Weight: 1.2 lbs. Sold as each. |
Weapon Storage Vertical retail display hanger, left side. Holds 3 rifles vertical at angle away from the panels to the left side. Sticks out from the panels 12”. Includes hanger and mounting screws.
Dimensions: 3 ½” high X 12” deep. Weight: 1 lbs. Sold as each. |
Weapon Storage Vertical retail display hanger, right side. Holds 3 rifles vertical at angle away from the panels to the right side. Sticks out from the panels 12”. Includes hanger and mounting screws.
Dimensions: 3 ½” high X 12” deep. Weight: 1 lb. Sold as each. |
Vertical Stock Floor Shelf
Item # VH-SSF-3.2 
Vertical stock shelf system for weapon storage that fits 3 vertical rifles. Can be installed directly on the floor or on top of a cabinet. Comes with a stock shelf, installation bar, base cups, foam pieces, and mounting screws.
Dimensions: 11” high X 9 ¾” wide. Weight: 3 lbs. Sold as each. |
Handgun Hangers
|
Handgun Hanger 1 Handgun
Item # HGH-1-R 
Weapon storage handgun hanger that holds 1 handgun. Keeps it close to the wall panels so the gun is easy to see and display. Rubber insert to protect the gun.
Dimensions: 4” high X 3” wide X 3" deep. Weight: 1 lb. Sold as each. |
Handgun Hanger – 1 Left Handgun
Item # HGH-1-L 
Handgun hanger that holds 1 handgun. Keeps it close to the wall panels so the gun is easy to see and display. Rubber insert to protect the gun.
Dimensions: 4” high X 3” wide X 3" deep. Weight: 1 lb. Sold as each. |
|
Weapon Storage Triple handgun hanger. Holds all styles with shorter and longer barrels. Very efficient handgun storage. For revolvers with barrels over 3” we suggest our HGH-1 hanger. Includes shelf and mounting screws.
Dimensions: 7 ¼” high X 9 ¾” wide X 8 ¼” deep. Weight: 3 lbs. Sold as each. |
Hybrid Handgun Shelf Hanger
Item # HGSH-HY-6.1 
Hybrid Handgun Shelf. The "Hybrid" design features half steel and half HDPE, a plastic composite material. Holds 6 handguns. This shelf works with most styles of handguns including shorter and longer barrels.
Dimensions: 7” High x 20” Wide x 8.25” Deep. Weight: 6 lbs. Sold as each. |
Hybrid Handgun Hanger
Item # HGSH-HY-10.1 
Hybrid Handgun Shelf. Holds 10 handguns. This shelf works with all styles of handguns. For revolvers with barrels over 3” we suggest our HGH-1 hanger. Great for efficient handgun storage.
Dimensions: 7 ½” high x 33” wide x 8 ½” deep Weight: 9 lbs. Sold as each. |
Weapon Storage Handgun barrel hanger. Small coated rod goes into barrel to hold handgun. On the hanger, the gun sits at about 45 degrees to the wall and at a slight angle up. Supports 1 handgun. Includes hangers and mounting screw.
Dimensions: 4” high X 3” wide X 3" deep. Weight: 1 lb. Sold as each. |
|
Heavy-duty Hybrid Handgun Hanger
Item # HGH-HY-HD-1 
Heavy-duty Hybrid Handgun Hanger. This hanger is meant to larger handguns and/or handguns with attached suppressors. Includes the steel hanger, HDPE "U" inserts and all necessary screws.
Dimensions: 3” high x 4 ½” wide 3” deep Weight: 1 lb. Sold as each |
Magwell Hanger - Horizontal 9mm Right
Item # MWH-G9.1R. 
Magwell Horizontal Hanger. Holds Double Stack Glock 9mm with a magazine well insert. Handgun faces left. Secures into place with the mag release. Fits Glock 9mm caliber handguns with standard Magwell. Holds one handgun.
Dimensions: 6” High x 4.5" Wide x 3.25” Deep. Weight: 1 lb. Sold as each. |
Magwell Hanger - Horizontal 9mm Left
Item # MWH-G9.1L 
Magwell Horizontal Hanger. Holds Double Stack Glock 9mm with a magazine well insert. Handgun faces left. Secures into place with the mag release. Fits Glock 9mm caliber handguns with standard Magwell. Holds one handgun.
Dimensions: 6” High x 4.5" Wide x 3.25” Deep. Weight: 1 lb. Sold as each. |
|
Magazine Shelf
Magazine Shelf Hanger, This is our most universal magazine storage hanger. It's designed to work with multiple calibers and magazine sizes. It allows magazines to be stored standing up laying down.
Dimensions: 3” Wide x 3” Deep x 3” High. Weight: 1 lb. Sold as each. |
Magazine shelf that will hold approximately 5 each of handgun and smaller ammo magazines. Fits on any of the WP products.
Dimensions: 5” wide, 2” deep, 3” high. Weight: 1 lb. Sold as each. |
Magazine shelf that will hold approximately 5 each of 5.56/ .223 AR, AK and other magazines. Fits on any of the WP products.
Dimensions: 5” wide, 3” deep, 3” high. Weight: 1 lb. Sold as each. |
Magazine shelf that will hold approximately 5 each of 7.62/ 308 magazines. Fits on any of the WP products.
Dimensions: 6.5” wide, 3” deep, 3” high. Weight: 1.5 lbs. Sold as each. |
Shelves
Shelf, 8″ wide x 3″ deep. Perfect for night vision, optics, knives or anything else you want to put on it. Does have a small lip that goes around the outside of the shelf.
Dimensions: 8” wide X 3” deep. Weight: 1.4 lbs. Sold as each |
|
This is a custom part, designed for displaying knives with a fixed blade. The size fits most knives. It includes 2 magnets to hold the knife in place for better display.
Dimensions: 4” high x 12” wide x 5” deep Weight: 2 lbs. Sold as a set. |
11.4" Shelf
Item # SH-11.4 
Perfect to hold bigger items like binoculars, night vision, hearing protection. This product does have added support to hold heavier items like ammunition. Has a small lip that goes around the edge of the shelf. Comes with mounting screws
Dimensions: 11″ wide x 4″ deep. Weight: 1.8 lbs. Sold as each. |
Heavy-duty shelf meant for heavier items. Specially design sides and back for extra support. Works great for bulk ammunition and bigger items. It does work with all the different wall panels. Comes with 1 shelf and all necessary screws.
Dimensions: 8” high x 16” wide x 10” deep Weight: 8 lbs. Sold as each |
22” Wide Ammunition Shelf
Item # SH-22.10 
Heavy-duty shelf meant for heavier items. Specially design sides and back for extra support. Works great for bulk ammunition and bigger items. It does work with all the different wall panels. Comes with 1 shelf and all necessary screws.
Dimensions: 8” high x 22” wide x 10” deep Weight: 10 lbs. Sold as each |
Accessories
|
|
|
|
|
Retractable Security Cable Hanger
Item # RCH-2 
This hanger is perfect for securing weapons to the racks but still allowing customers to take them off and check them out. It features a 36” security cable that tethers the weapon but easily extends and retracts back into place.
Dimensions: 3.5” High x 2” Wide 0.75” Deep. Weight: 0.5 lb. Sold as each. |
Heavy- Duty Hook and Vest Hanger
Item # Hhook.hanger 
Heavy-duty Hook hanger and Vest hanger combo. Both the Hook and Hanger are meant for heavier equipment like plate carriers. This set includes 1 of the Hhook-1, heavy-duty hanger and all necessary screws.
Dimensions of the hook hanger: 2” high x 1” wide x 6” deep Dimensions of the plastic hanger: 10” high x 16” wide x 1 ¼” deep Set Weight 2 lbs. Sold as set |
Helmet Hanger
Item # Helmet-1 
Helmet hanger, Holds 1 helmet, fits all our wall panels. Sits about 11" high. Includes hanger and mounting screws.
Dimensions: 11” high X 3 ¼” deep. Weight: 1 lb. Sold as each. |
Helmet and Hook Hanger Combo
Item # Helmet-hhook.1 
The helmet hanger and heavy-duty hook hanger, built into one piece. It's meant to hold a helmet and vest/ plate carrier but the compact design uses less room on the rack.
Dimensions: 3 ½” high x 4 ¾” wide x 8” deep Weight: 2 lbs. |
|
Locking Loop Hanger
Item # LH.1 
The Locking Loop Hanger attaches to the wall panel and allows for a cable to go through the hole and secures the gun in place. These products can be used anywhere on the wall panels and works with any of the hangers.
Dimensions: 4 ½” high x 1” wide x 1 1/8” deep. Weight: .5 lb. Sold as each. |
Additional bag of 25 screws. These screws are used to secure the wall panels onto the support bars. They are also used to attach the magwell inserts into the magwell hanger.
|
Additional bag of 25 mounting screws. These screws are used to secure the wall panels onto the support bars. They are also used to attach the magwell inserts into the magwell hanger.
|
Hook Hangers
|
Hook Hanger 4"
Item # Hook-4G 
Hook Hanger, rod is 4” long. Supports most retail packaging and also great to hold barrels, uppers and other gun parts. Note, the rod is square and a little thicker than standard hooks so it can support more weight. Some packaging may be a little tight on the hook. Includes mounting screw.
Dimensions: 1/4” square rod X 4” deep. Weight: 1 lb. Sold as each. |
Retail Hook Hanger 4"
Item # R-Hook-4 
Retail Hook Hanger, rod is 4” long. Supports most retail packaging. Includes mounting screw.
Dimensions: 1/4” round rod X 4” deep. Weight: 1 lb. Sold as each |
Hook Hanger, rod is 8” long. Perfect to hold barrels, uppers and other gun parts. The rod is square and a little thicker than standard hooks so it can support more weight. If used for retail packaging, some may be a little tights on the hook. Includes mounting screw.
Dimensions: 1/4” square rod X 8” deep. Weight: 1 lb. Sold as each. |
Retail Hook Hanger, rod is 8” long. Supports most retail packaging. Includes mounting screw.
Dimensions: 1/4” round rod X 8” deep. Weight: 1 lb. Sold as each. |
|
Retail Hook Hanger 12”
Item # R-Hook-12 
Retail Hook Hanger, rod is 12” long. Supports most retail packaging.
Available in Gray Tan and Brown color. Dimensions: 1/4” round rod X 12” deep. Weight: 1 lb. Sold as each. |
Hook hanger that has 1 hook. Can be used to hang items on the wall panels like vests or chest rigs, backpacks, slings, ammo bandoleers etc… Fits on all wall panel parts.
The dimensions are 2” high X 1” wide X 6" deep. Weight: 1 lb. Sold as each. |
When designing your rack, here are a few things that can help:
- First and MOST IMPORTANT, make sure this is a secure location so you guns are safe and locked up away from anyone that should not have access to them.
- Know the wall sizes you want to put the racks on and think about how much of that wall you want to cover with the wall panels.
- A rough number of guns you want to hang will also help a lot with know exactly what you need.
- Think about how you want the guns stored, Vertical, Horizontal, a mixture of both.
- Think about anything else you’d like to hang on the racks. For examples vests, belts, magazines, gun parts, optics etc……….
- Keep in mind anything else you envision for your wall or room such as workbench or table, cabinets, ammo storage, etc.
Understanding the Products
Wall Panels(Wall Panel Specs)We offer 2 types of wall panels, Standard and Thin. In both series we offer multiple sizes to help fits most applications.
The Standard panels (WP) can be used to create any size rack but commonly used to create larger racks that will cover more space. They require a support bar (SB) part to be installed correctly. These panels can be combined to create a wall panel as large as required. They interlink with together to create a strong, modular rack. When the WP-24.36 and WP-24.23 are installed next to each other, the hole pattern in the panels will continue on spaced perfectly to create one large rack. The WP-24.41 can be installed on top of each other and the pattern will still be aligned. But if you install them next to each other or next to other wall panels (WP-24.23, WP-24.36) there will be about 1 ½” space in the hole panels spacing. The panels will still work great but this may affect using vertical hangers that go from one panel to the next. The WP-48.5 is meant for more of a stand-alone rack for smaller, odd-shaped areas.
The Thin panels (WPT) are designed for smaller sized racks. They are thinner and only stick out from the wall less than 3/8”. These models do not us Support Bars but they also hold less weight. These are, most of the times used in smaller areas that require vertical storage for efficiently. They are also used for displays and safe interiors. They can be mounted next to each other to create a larger rack. All the hangers can be used on these panels. We offer multiple sizes with several more being released later this year.
The image below demonstrates the break in pattern by installing two 41" panels side by side. Installing a 41" panel next to a 23" or 36" will also break the pattern.
Wall Panels(Wall Panel Specs)We offer 2 types of wall panels, Standard and Thin. In both series we offer multiple sizes to help fits most applications.
The Standard panels (WP) can be used to create any size rack but commonly used to create larger racks that will cover more space. They require a support bar (SB) part to be installed correctly. These panels can be combined to create a wall panel as large as required. They interlink with together to create a strong, modular rack. When the WP-24.36 and WP-24.23 are installed next to each other, the hole pattern in the panels will continue on spaced perfectly to create one large rack. The WP-24.41 can be installed on top of each other and the pattern will still be aligned. But if you install them next to each other or next to other wall panels (WP-24.23, WP-24.36) there will be about 1 ½” space in the hole panels spacing. The panels will still work great but this may affect using vertical hangers that go from one panel to the next. The WP-48.5 is meant for more of a stand-alone rack for smaller, odd-shaped areas.
The Thin panels (WPT) are designed for smaller sized racks. They are thinner and only stick out from the wall less than 3/8”. These models do not us Support Bars but they also hold less weight. These are, most of the times used in smaller areas that require vertical storage for efficiently. They are also used for displays and safe interiors. They can be mounted next to each other to create a larger rack. All the hangers can be used on these panels. We offer multiple sizes with several more being released later this year.
The image below demonstrates the break in pattern by installing two 41" panels side by side. Installing a 41" panel next to a 23" or 36" will also break the pattern.
Support Bars
A Support Bar (SB products) is needed only on the top of each column of panels. They are NOT needed further down the rack. The SB’s feature a row of holes spaced at about ½” apart. This helps you align them to make you can screw into the 2x4 (or other wall supports). This part will also help keep the rack level. We offer them in sizes to match each wall panels as well as 72” wide piece. We offer Trim kits (TK parts) to install over the mounting holes for a cleaner look.
Picking a color. Our standard colors are Tan, Gray and Brown. All colors are designed so the rack blends into the background and the guns stand out. The Gray is more of a darker Gray and will look a little more “armory-style or industrial”. The Tan is also darker and will be a little more of a “warm” color. Both colors looks great around cabinets, vault doors and trimmed out with wood.
A Support Bar (SB products) is needed only on the top of each column of panels. They are NOT needed further down the rack. The SB’s feature a row of holes spaced at about ½” apart. This helps you align them to make you can screw into the 2x4 (or other wall supports). This part will also help keep the rack level. We offer them in sizes to match each wall panels as well as 72” wide piece. We offer Trim kits (TK parts) to install over the mounting holes for a cleaner look.
Picking a color. Our standard colors are Tan, Gray and Brown. All colors are designed so the rack blends into the background and the guns stand out. The Gray is more of a darker Gray and will look a little more “armory-style or industrial”. The Tan is also darker and will be a little more of a “warm” color. Both colors looks great around cabinets, vault doors and trimmed out with wood.
Building your dream Gun Rack is simple and quick if you follow the steps below:
STEP 1: Measure the width of the wall you want to put the Gun Storage Rack on with a tape measure
STEP 2: Choose the size of the Support Bar that will fit the rack you are looking to build. A Support Bar is necessary to secure the weapon storage system to the wall.
(example: if you want to build a 6' wide rack, choose the 72" support bar. If you want to build a 9' gun storage rack choose a 72" bar and a 36" bar)
STEP 3: Choose the Wall Panels that will build your perfect gun storage rack
(You may need two different size panels depending on the size of your wall)
STEP 4: Choose the Trim pieces for your rack. Trim Pieces are made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed.
STEP 5: Choose the Hangers and Accessories to fill out your completed Weapon Storage Rack
STEP 6: Make sure to choose Tan, Grey and Brown panels and accessories at checkout.
STEP 1: Measure the width of the wall you want to put the Gun Storage Rack on with a tape measure
STEP 2: Choose the size of the Support Bar that will fit the rack you are looking to build. A Support Bar is necessary to secure the weapon storage system to the wall.
(example: if you want to build a 6' wide rack, choose the 72" support bar. If you want to build a 9' gun storage rack choose a 72" bar and a 36" bar)
STEP 3: Choose the Wall Panels that will build your perfect gun storage rack
(You may need two different size panels depending on the size of your wall)
STEP 4: Choose the Trim pieces for your rack. Trim Pieces are made to cover the mounting strips that show on top and bottom of the Wall Panels once the rack is installed.
STEP 5: Choose the Hangers and Accessories to fill out your completed Weapon Storage Rack
STEP 6: Make sure to choose Tan, Grey and Brown panels and accessories at checkout.
